Hot Water Heater Repair Basics
Hot water heater repair is something every homeowner could do, especially when it comes to electrical appliances. However, some problems might seem simple, while some require immediate professional attention from an expert technician. Here are the top 5 most common problems with hot water heaters. They could easily be solved by anyone with even a general knowledge of repairs.
Leakage: It’s very common to have leaks in any kind of appliance that runs on electricity, hot water heater repairs included. This is due to poor installation, to avoid leaks and to make sure you’re using the best materials and the right connections. You could simply have to run a few pipes under the cold water pipe, or to connect the cold water pipe to the hot water fitting, and fix the leaks. You could also try caulking the edges of the pipes. If this doesn’t solve the problem, the best option would be calling plumbers to fix the leak.
Leakage in the tank: If you find that your hot water heater repair is leaking in the tank, then the first thing to check is the tank seal. Sometimes, the leak might be caused by a metal cap being worn out and causing water to seep out into the tank. This is easy enough to replace – all you need to do is remove the old cap and stick a new one in its place. Alternatively, if you’re not sure that the problem is with the cap, simply open up the tank and fill it with air until the water stops leaking – this should ensure that there isn’t a leak anywhere else.
Bulges: Hot water heaters are generally pretty robust machines, but sometimes things can go wrong with them. One of these is a bulge in the tank, which causes the whole machine to seep heat from the sides. This can be fixed in a number of ways, depending on the size and severity of the crack. For small cracks, you can use compressed air to blast them out, but for larger ones, like those that are much deeper, you’ll need to take the unit to a repair shop to have a hole drilled to remove the old heating element, then buy a new one. The downside of this is that your home’s electricity supply may be interrupted for a while during this process, but otherwise, it’s not a big deal.
Frozenora: A lot of hot water heaters come with built-in safety features that are meant to prevent damage to your home. One such feature is the “freezing plate”, which can be turned on to prevent heat loss if the tank is below freezing. Unfortunately, this doesn’t always work, and in some cases, the frozenora can cause damage to your water heaters if it’s left on too long. If you suspect that this safety feature is not working properly, contact a technician from the Hot Water Heater Repair Service nearest to you.
These technicians know all about hot water heater repair, and they can take care of all of your plumbing problems. You won’t have to pay an arm and a leg for the services that they provide, since they’re generally well within their company’s budget. They also specialize in the best, so you shouldn’t have to worry about getting clogged drains or having your pipes repaired by an inexperienced plumber. If you do feel comfortable with the person who’s coming to fix your device, give them a call and schedule an appointment right away. Most of their time is reserved for emergency situations only, but if they have the time to spare, they will fix anything that needs fixing.